In daily operation and operation, attention should be paid to the maintenance and rust prevention of wastewater treatment equipment。The following is the daily maintenance of domestic wastewater treatment equipment:

In order to ensure the normal operation of the machine and extend its service life, proper use and operation are essential。At the same time, regular inspections, timely maintenance and maintenance should be carried out。

1, the correct choice of domestic sewage treatment equipment filter cloth。At the end of each operation, the filter cloth needs to be cleaned once to ensure that there is no residue on the surface of the filter cloth。The filter cloth should be softened when hardened, and repaired or replaced in time when damaged。

2, pay attention to protect the sealing surface of the filter plate, do not collide, and stand better when placed, which can reduce deformation。

3, the tank of domestic sewage treatment equipment is usually cleaned once every six months to replace the hydraulic oil in the tank。If the liquid level is below the lower limit, oil should be replenished immediately。

4, the temperature of the material liquid to be filtered should be less than 100℃, and the material liquid should not be mixed with debris and hard substances to block the feed port, so as not to damage the filter cloth。

5, need to open and close the valve for liquid supply and washing water according to the operating procedure。Feed liquid and washing water must not enter at the same time。After the end of the work, the remaining liquid in the pipeline of domestic sewage treatment equipment should be discharged as far as possible。

6. Keep the machine of domestic wastewater treatment equipment clean, keep the workplace sanitary and the road unblocked。Do not step on pipes and valves to avoid bending and causing leaks。